Camshafts and Valvetrain

TREND PERFORMANCE PRODUCTS

Pushrod - 8.200 in Long - 3/8 in Diameter - 0.080 in Thick Wall - Ball Ends - Chromoly - Each

TREND PERFORMANCE PRODUCTS

Pushrod - 8.200 in Long - 5/16 in Diameter - 0.080 in Thick Wall - Ball Ends - Chromoly - Each

COMP CAMS

Camshaft - Xtreme Energy - Hydraulic Flat Tappet - Lift 0.487 / 0.493 in - Duration 256 / 268 - 110 …

SHARP ROCKERS

Rocker Arm - Original - 7/16 in Stud Mount - 1.73 Ratio - Full Roller - Aluminum - Orange Anodized -…

MANLEY

Rocker Arm - 3/8 in Stud Mount - 1.50 Ratio - Grooved Rocker Balls / Nuts Included - Stamped Steel -…

MANLEY

Valve Lash Cap - 0.080 in Thick - 7 mm Valve Stems - Minimum 0.290 in Tip - Non-Rotating - Steel - N…

COMP CAMS

Camshaft - Thumper NSR Stage 1 - Hydraulic Roller - Lift 0.541 / 0.536 in - Duration 276 / 295 - 112…

COMP CAMS

Valve Spring - Dual Spring - 566 lb/in Spring Rate - 1.050 in Coil Bind - 1.565 in OD - Set of 16

COMP CAMS

Pushrod - Hi-Tech - 7.900 in Long - 5/16 in Diameter - 0.080 in Thick Wall - Chromoly - Small Block …

COMP CAMS

Camshaft - Factory Muscle - Hydraulic Flat Tappet - Lift 0.447 / 0.447 in - Duration 342 / 342 - 114…

HOWARDS RACING COMPONENTS

Lifter - Street Series Retrofit - Hydraulic Roller - 0.842 in OD - Link Bar - Oldsmobile V8 - Set of…

HOWARDS RACING COMPONENTS

Lifter - Street Series Retrofit - Hydraulic Roller - 0.842 in OD - Link Bar - Pontiac V8 - Set of 16